Wireless IOT Tri Axis Inclinometer | Accessories - BeanAir

Go to content
Technical Specifications
Product Reference
BND-2.4GHZ-HI-INC-SR-MR-PS-MO-HG
MR – Measurement Range:
- 10T : Tri-axis ±10° / ±90°
PS - Power supply :
- RB : Internal rechargeable battery
- XT : External power supply 4VDC ( Compatible with X-SOLAR-4VDC and PRIM-XTENDER)
MO - Mounting Option
SCM - Screw Mounting base
MM - Magnetic Mounting base
HG: High Gain External Antenna 5dBi
If this field is left blank,Integrated Radome Antenna will be provided
Example 1: BND-2.4GHZ-HI-INC-SR-10T-SCM, High performance wireless Tri-axis  inclinometer with ±10°/±90° measurement range, internal rechargeable battery,  Screw mounting , Integrated Radome Antenna
Example 2: BND-2.4GHZ-HI-INC-SR-10T-XT-MM, High performance wireless Tri-axis  inclinometer with ±10°/±90° measurement range, external power supply,  Magnetic Mounting, Integrated Radome Antenna
Example 3:  BND-2.4GHZ-HI-INC-SR-10T-SCM-HG, High performance wireless Tri-axis  inclinometer with ±10°/±90° measurement range, internal rechargeable battery,  Screw mounting , External High Gain Antenna
Sensor specifications
Inclinometer technology
Accurate and low power MEMS technology
Scalable Measuring Range
user-seletctable range ±10° or ±90°, with  automatic range adjustment depending on the application
Sensor resolution
0.0055°
Noise density
for ±10° range : 0.0007 °/√Hz on Y Axis, 0.008 °/√Hz on X, Z Axis
for ±90° range : 0.0012 °/√Hz on all axis
Sensor precision (full scale, @ 25°C, Static Measurement Mode every 2s)
±0.01° for  ±10° measurement range
±0.02° for  ±90° measurement range
Offset temperature dependency (temperature range –25°C to +85°C)
±0.0008 °/°C
Sensitivity temperature dependency (temperature range –25°C to +85°C)
±0.1 %
Offset LifeTime Drift (@25°C) ±0.23 ° Sensor
±0.08 °
Sensor frequency Response (-3 dB)
DC to 10 Hz for  ±10° measurement range
DC to 40 Hz for  ±90° measurement range (Automatic Range)
DC to 70 Hz for  ±90° measurement range
Calibration
Factory calibrated for ±10° range and  ±90° with calibration settings backed up on the sensor Flash memory.
Calibration method used : Back-to-back calibrated with a reference sensor.
Re-calibration procedures  are available on our website, and sensor can be re-calibrated by the user or with an external Lab
Integrated Temperature sensor
Temperature Range
-40°C to +60°C
Measurement resolution
±0.06°C
Sensor Precision
±1°C
Configurable settings from the BeanScape® 2.4GHz software
Data Acquisition mode
(SPS = sample per second)
Static Data Acquisition: Low Duty Cycle Data Acquisition (LDCDA) and Alarm Mode (based on alarm thresholds) .
Measurement heartbeat 1s to 24 hour
Dynamic data acquisition(not available on devices with ref. extension XT ): Streaming and S.E.T. (Streaming with Event Trigger) Mode  
Alarm Threshold
Three-level alarms : Alert < Action < Alarm
Sampling Rate (in streaming and S.E.T mode)
Minimum: 1 SPS
Maximum: 20 SPS on each axis , for ±10° measurement range (Static and Auto Range) ,  for ±90° measurement range (Auto Range) ,
Maximum: 80 SPS on each axis , for ±90° measurement range (Static Range)
Scalable Mesurement Range
±10° , ±90° and automatic ±10°/±90°
Power Mode
Battery saver mode & Active power mode (not available on XT version, External power supply)
RF Specifications
Wireless Technology
Ultra-Power and license-free 2.4Ghz radio technology (IEEE 802.15.4E)
WSN Topology
Point-to-Point / Star
Data rate
250 Kbits/s
RF Characteristics
ISM 2.4GHz – 16 Channels. Antenna diversity architecture designed by BeanAir®
TX Power
+18 dBm
Receiver Sensitivity
-104 dBm
Maximum Radio Range
High Gain Antenna : 400-500m (L.O.S), 60-120m (N.L.O.S.)
Integrated Radome Antenna : 200-300m (L.O.S), 30-60m (N.L.O.S.)
Antenna
Antenna diversity :
High Gain Antenna : 2 x N-Type Antenna 5dBi , IP67
Radome Antenna : 2 x Antenna 1.9 dBi , IP67
Embedded Data logger
Storage Capacity
up to 8 million data points
Wireless data downloading
20 minutes to download the full memory (average time)
TimeSync function : Clock synchronization over the Wireless Sensor Networks (WSN)
Clock synchronization accuracy
±2.5 ms (at 25°C)
Crystal specifications
Tolerance ±10ppm, stability ±10ppm
Environmental and Mechanical
Casing
Aluminum AL6061 & Waterpoof casing
• Dimensions in mm (LxWxH): 100 x 71 x 38 (without Radome antennas, with mounting eyelet)
• Weight (with internal battery & Radome Antenna) :
240g (screw mounting)
265g (magnetic mounting)
• Weight (with internal battery & High Gain Antenna) :
440g (screw mounting)
465g (magnetic mounting)
Shocks resistance
150g during 50 ms
Operating Temperature
RB : Internal rechargeable battery
-40 °C to +60 °C
XT : External Power Supply
-40 °C to +75 °C during battery discharge
A Sunshield must be used if the sensor is exposed to direct sun radiation.
Norms & Radio certifications
• CE Labelling Directive R&TTE (Radio) ETSI EN 300 328
• FCC (North America)
• ARIB STD-T66 Ver 3.6
• ROHS - Directive 2002/95/EC
IP|NEMA Rating
IP67 | Nema 6
Maximum Humidity
90 %RH
Base Plate
-Aluminum black anodized AL 7075 with rugged three-point-mounting
-Screw Mounting Option: the device should be mounted on a flat and smooth surface with 3 screws, dimension M5. Mounting torque 5 ±1Nm
-Magnetic Mounting Option: the device should be mounted on a steel surface.
Power supply
Integrated battery charger
Integrated Lithium-ion battery charger with high precision battery monitoring :
• Overvoltage/Overcurrent/Short-Circuit/Undervoltage protection
• Battery Temperature monitoring
Current consumption @ 3.3V
• During data acquisition : 30 to 40 mA
• During Radio transmission : 55 mA @ 18 dBm
• During Battery Saver Mode : < 30 µA
External power supply
8-28VDC with reverse polarity protection
IEC-61000-4-2:  ESD 30kV(Air), 30kV (Contact)
Surge protection  > 28VDC  (600W during 10us max)
Rechargeable battery
2 Ah, Lithium-Polymer battery
INCLUDED ACCESSORIES
1x Magnet to Power ON/Power OFF the device
1x M8 Cap for Power Supply
Optional Accessories and Services
External Power Supply
Wall   plug-in, Switchmode power Supply 12V @ 1,25A with sealed M8 Plug (IP67/Nema   6)
Ref: M8-PWR-12V
Standalone Solar System
High efficiency solar panel with
with Solar charging controller and Lead-acid   battery
Ref.: X-SOL-7AH-20W-4V-5M for XT version
Ref.: X-SOL-7AH-20W-12V-5M for RB version
Ref: X-SOL-14AH-20W-4CH-4V-5M for XT   version
Ref: X-SOL-14AH-20W-4CH-12V-5M for RB version
Ref: X-SOL-14AH-80W-4CH-4V-5M for XT version
Ref: X-SOL-14AH-80W-4CH-12V-5M  for   RB version
More options and references are available on   X-SOLAR datasheet
Bracket Mounting
90°   Bracket for BeanDevice
(Xrange smartsensor) with 4 x M5 screws + Locknut
Ref: SMART-BRACK-MNT
External Primary Cell in a Waterproof IP67 Casing
Waterproof IP67 battery box for long-term monitoring applications
IP67 Battery Holder +  Battery Pack with 3 x 6500mAh Li-SOCL2 Lithium Primary cell (Capacity 3x 6.5Ah)
Ref: PRIM-XTENDER
Compatible  with  :
BND-2.4GHZ-HI-INC-SR-10T-XT-MM & BND-2.4GHZ-HI-INC-SR-10T-XT-SCM
M8  extension cable for external power supply
Molded   cable with M8-3pins male plug
Material: PVC with shield protection
IP Rating :  IP67 | Nema 6
Cable length: 2 meters , Ref: CBL-M8-2M
Cable length : 5 meters, Ref: CBL-M8-5M
Cable length: 10 meters, Ref: CBL-M8-10M
Calibration certificate
Calibration   certificate provided by Beanair Sensors
A static calibration method is used on a granite surface plate DIN876
Ref: CERT-CAL-SMART
Included Accessories
« M8 plastic cap »
M8 plastic cap

1 x M8 Cap for Power Supply
« included accessories »
Magnet for Power ON | Power OFF

1pcs Magnet.
« included accessories »
« magnet for power on/off »
Optional Accessories and Services
Molded Cable, M8 Male Plug to Bare wire
For sensor power supply (8-28VDC)

Material: PVC
IP Rating :  Waterproof-IP67 ( M8 Plug side in locked conditions )
Cable length: 2 meters , Ref: CBL-M8-2M
Cable length : 5 meters, Ref: CBL-M8-5M
Cable length: 10 meters, Ref: CBL-M8-10M
« optional accessories »
Mechanical Mounting Options
« optional accessories »
Mechanical Mounting Options
Switch-Mode Power Supply 12V with M8-3Pins plug
Power supply complies with IS 13252 (Part 1)/IEC 60950

1-Safety Standards
Cable Lenght: 1.5meters
IP Rating : Waterproof-IP67 ( M8 Plug side in locked conditions )
Ref: M8-PWR-12V
Mechanical Mounting Options
External Primary Cell in a Waterproof IP67 Casing

Waterproof IP67 battery box for long-term monitoring applications
IP67 Battery Holder +  Battery Pack with 3 x 6500mAh Li-SOCL2 Lithium Primary cell (Capacity 3x 6.5Ah)
Ref: PRIM-XTEND

Compatible  with  :
BND-2.4GHZ-HI-INC-SR-10T-XT-MM & BND-2.4GHZ-HI-INC-SR-10T-XT-SCM


« optional accessories »
Mechanical Mounting Options
Standalone Solar System
High efficiency solar panel with Solar charging controller and Lead-acid battery
Ref: X-SOL-14AH-20W-4CH-4V-5M for XT version
Ref: X-SOL-14AH-20W-4CH-12V-5M for RB version
Ref: X-SOL-14AH-80W-4CH-4V-5M for XT version
Ref: X-SOL-14AH-80W-4CH-12V-5M  for RB version

Ref.: X-SOL-7AH-20W-4V-5M for XT version
Ref.: X-SOL-7AH-20W-12V-5M for RB version
More options and references are available on X-SOLAR datasheet
« optional accessories »
Mechanical Mounting Options
Calibration Certificate

Calibration certificate provided by Beanair GmbH
A static calibration method is used on a granite surface plate DIN876
Ref: CERT-CAL-SMART
« optional accessories »
Copyright 2025 © BeanAir - All rights reserve
Back to content