Wireless IOT Shock Sensor | 2.4GHz sensors | Accessories - BeanAir

Go to content
Technical Specifications
Product Reference
BND-2.4GHz-AX3DS -MR-RB-MO-HG
MR – Measurement Range:
- 24G: ±6/12/24g measurement range
- 8G:  ±2/4/8g measurement range
PS - Power Supply
RB : rechargeable battery
MO - Mounting Option
SCM - Screw Mounting base
MM - Magnetic Mounting base
HG: High Gain External Antenna 5dBi
If this field is left blank,Integrated Radome Antenna will be provided
Example 1: BND-2.4GHz-AX3DS-24G-RB—Wireless Accelerometer with ±6/12/24g measurement range , rechargeable battery
Example 2: BND-2.4GHz-AX3DS-8G-RB-SCM—Wireless Accelerometer with ±2/4/8g measurement range , rechargeable battery, screw mounting option
Sensor Specifications
Accelerometer technology
Low power MEMS technology
Scalable measurement range
24G Version:±6g / ±12g/ ±24g
8G Version:±2g / ±4g/ ±8g
Typical non-linearity (Full scale, @ 25°C)
±0.09% for the version BND-2.4GHZ-AX3DS-8G-RB
±0.11% for the version BND-2.4GHZ-AX3DS-24G-RB
Measurement resolution
24G Version:3 mg/digit @±6g , 6 mg/digit @±12g , 12 mg/digit @±24g
8G Version: 1mg/digit @±2g , 2 mg/digit @±4g , 3.9 mg/digit @±8g
Analog to Digital converter
12-bits with temperature compensation
Zero-g level change vs temperature (max delta from 25°C)
24G Version: ±0.4 mg/°C
8G Version: ±0.1 mg/°C
Sensitivity change Vs temperature
±0.01 mg/°C
Typical zero-g level offset accuracy
24G Version: ±70 mg
8G Version: ±20 mg
Noise spectral density @ BW 10Hz
24G Version: 250 µg/ √Hz
8G Version: 118 µg/ √Hz
Anti-aliasing filter
Butterworth 2th order filter
Configurable settings from the BeanScape® 2.4GHz software
Data Acquisition mode
(SPS = sample per second)
Dynamic data acquisition: Streaming and SSD ( Smart Shock Detection)
Sampling Rate (in streaming and S.E.T mode)
Minimum: 1 SPS
Maximum: 3 kSPS per axis (one axis enabled)
1,5 kSPS per axis (2-axis enabled)
1 kSPS per axis (3-axis enabled)
Shock detection function
· Shock threshold in mg
· Data acquisition sample rate in sleeping mode· Data acquisition sample rate after the shock detection
· Shock detection hysteresis
Power Mode
Battery saver mode & Active power mode
RF Specifications
Wireless Protocol Stack
Ultra-Power and license-free 2.4Ghz radio technology (IEEE 802.15.4E)
WSN Topology
Point-to-Point / Star
Data rate
250 Kbits/s
RF Characteristics
ISM 2.4GHz – 16 Channels. Antenna diversity architecture designed by BeanAir®
TX Power
+18 dBm
Receiver Sensitivity
-104 dBm
Maximum Radio Range
High Gain Antenna : 400-500m (L.O.S), 60-120m (N.L.O.S.)
Integrated Radome Antenna : 200-300m (L.O.S), 30-60m (N.L.O.S.)
Antenna
Antenna diversity :
High Gain Antenna : 2 x N-Type Antenna 5dBi , IP67
Radome Antenna : 2 x Antenna 1.9 dBi , IP67
Embedded Data logger
Storage Capacity
up to 1 million data points
Wireless data downloading
3 minutes to download the full memory (average time)
Environmental and Mechanical
Casing
Aluminum AL6061 & Waterpoof casing
Dimensions in mm (LxWxH) without Antenna: 100x55x36 mm
Weight :
200g with Integrated Radome Antenna
400g with HG Antenna (antenna included)
Shocks resistance
100g during 50 ms
Operating Temperature
-40 °C to +60 °C , a sunshield must be used if the sensor is exposed to direct sun radiation
Norms & Radio certifications
• CE Labelling Directive R&TTE (Radio) ETSI EN 300 328
• FCC (North America)
• ARIB STD-T66 Ver 3.6
ROHS - Directive 2002/95/EC
Maximum   Humidity
90 %RH
IP|NEMA Rating
IP67 | Nema 6
INCLUDED ACCESSORIES
1x Magnet to Power ON/Power OFF the device
1x M8 Cap for Power Supply
Optional Accessories and Services
External   Power Supply
Wall   plug-in, Switchmode power Supply 12V @ 1,25A with sealed M8 Plug (IP67/Nema   6)
Ref: M8-PWR-12V
M8   extension cable for external power supply
Molded   cable with M8-3pins male plug
Material: PVC with shield protection
IP Rating :  IP67 | Nema 6
Cable length: 2 meters , Ref: CBL-M8-2M
Cable length : 5 meters, Ref: CBL-M8-5M
Cable length: 10 meters, Ref: CBL-M8-10M
Calibration   certificate
Calibration   certificate provided by Beanair Sensors
A static calibration method is used on a granite surface plate DIN876
Ref: CERT-CAL-SMART
Power supply
Integrated battery charger
Integrated Lithium-ion battery charger with high precision battery monitoring :
• Overvoltage/Overcurrent/Short-Circuit/Undervoltage protection
• Battery Temperature monitoring
Current consumption @ 3.3V
• During data acquisition : 20 to 30 mA
• During Radio transmission : 60 mA @ 18 dBm
• During sleeping mode: 68uA
• During Battery Saver Mode : < 28 µA
External power supply
8-28VDC with reverse polarity protection
IEC-61000-4-2:  ESD 30kV(Air), 30kV (Contact)
Surge protection  > 28VDC  (600W during 10us max)
Rechargeable Lithium-Polymer battery
2 Ah,  Lithium-Polymer battery
Included Accessories
« M8 plastic cap »
M8 plastic cap

1 x M8 Cap for Power Supply
« Included accessories »
« magnet for power ON/OFF »
Magnet for Power ON | Power OFF

1pcs Magnet.
« Included accessories »
Optional Accessories and Services
Solar Panel Kit

X-Solar 14ah | Solar Panel with Solar Charging Controller
Ref: X-SOL-14AH-SLP-VOUT-CL
>> More info

X-Solar 7ah | Solar Panel with Solar Charging Controller
Ref: X-SOL-7AH-SLP-VOUT-CL
« optional accessories »
Molded Cable, M8 Male Plug to Bare wire
For sensor power supply (8-28VDC)

Material: PVC
IP Rating :  Waterproof-IP67 ( M8 Plug side in locked conditions )
Cable length: 2 meters , Ref: CBL-M8-2M
Cable length : 5 meters, Ref: CBL-M8-5M
Cable length: 10 meters, Ref: CBL-M8-10M
« optional accessories »
Mechanical Mounting Options
« optional accessories »
Mechanical Mounting Options
Switch-Mode Power Supply 12V with M8-3Pins plug
Power supply complies with IS 13252 (Part 1)/IEC 60950

1-Safety Standards
Cable Lenght: 1.5meters
IP Rating : Waterproof-IP67 ( M8 Plug side in locked conditions )
Ref: M8-PWR-12V
« optional accessories »
Mechanical Mounting Options
Calibration Certificate

Calibration certificate provided by Beanair GmbH
A static calibration method is used on a granite surface plate DIN876
Ref: CERT-CAL-SMART
Copyright 2025 © BeanAir - All rights reserve
Back to content